Webasto BlueCool V-Series User Manual

8
Press the function button to activate Eco mode. Press the plus or minus but-
ton repeatedly to select the maximum output level at which the system is to operate.
•
Switching on system
•
Press the
function button (5) once
•
Eco 0 is shown
•
Press the
button (2) to change the setting to Eco 1 or Eco 2
•
Press the
button (1) to return to the Eco 0 setting
Confirm the entry by pressing the "On/Off"
button (6).
Eco 0: 100% of rated output
Eco 1: 80% of rated output
Eco 2: 45% of rated output
Activated Eco mode is indicated by the display alternately showing Eco1 and Eco2
as well as the set temperature.
Eco mode is never exited automatically but requires operator intervention.
Check the Eco mode setting if you find that the cooling output of the BlueCool
V-Series is unsatisfactory.
Refer to Section 4 "Malfunctions" for further information on reduced cooling
output.
3.9 Set the fan speed
•
Switching on system.
•
Press the fan setting button
(4).
The current fan speed is displayed.
•
Press the Plus button
(2) or Minus button (3) to change the fan speed.
•
If the Plus
button (2) is pressed again when the highest speed has already
been selected, automatic fan mode is switched on and “b A” appears on the
control element. Pressing the Minus button
(3) exits the automatic fan
mode and returns to the manual mode.
Confirm the entry by pressing the “On/Off” button
(6) or wait at least 5 se-
conds so that the entered value is automatically adopted.

Webasto BlueCool V-Series Specifications

General

Brand	Webasto
Model	BlueCool V-Series
Category	Air Conditioner
Language	English