24
GB
Remote control
Possible using an external optional immediate heat button.
Vehicles with ADR equipment
It is not possible to program a start time in ADR vehicles. The remaining
operating time is shown on the display while the heater is operating. The time
can be set. The alarm can be programmed with the standard clock.
Troubleshooting
In the event of a malfunction, fuses and electrical connections should be
checked for condition and security.
If the measures described below do not rectify the malfunction then the heater
must be checked by personnel duly trained by Webasto.
2010_2016_BA.book Seite 24 Dienstag, 24. Mai 2005 9:48 09
To Next Page
Loading...
Need help?
General
