Webasto SmarTemp Control 3.0 User Manual

SmarTemp Control 3.0 Installation - Operating Instructions
5
LCD Screen Symbol Legend – Air Heater
LCD Screen Symbol Legend – Coolant Heater
Mode (Auto or Manual)
Auto Mode
Manual Mode
Operation Using SmarTemp Panel
Heater ON Example
Press the Webasto button to turn heater on.
Select heater model – SmarTemp 3.0
1. Using the selection button enter the menu.
2. Using the rotary dial and the selection button, select Heater.
3. Select Heater again to enter the list of available heaters.
4. Select the heater you wish to control with the SmarTemp 3.0 using the rotary dial and the
selection button.
Select heater model – SmarTemp 3.0 Mobile App
1. From the home page tap the selection icon.
2. Select Heater Model from the settings menu.
3. Select the heater you wish to control with the SmarTemp 3.0 mobil app.
Main Screen
Heater Mode
Vent Mode
Timer Start Day / Time
Timer Active
Ambient Temperature
Set Temperature
Timer Start Day / Time
Ambient Temperature
Timer Active
Heat Mode
Runtime Remaining
Ambient Temperature
User Set Temperature
Mode Indicator
Heater ON
Vent Mode
Runtime Remaining
Mode Indicator
Ambient Temperature
Fan Speed Indicator (Low –
Medium - High)
Fan ON
Runtime Remaining
Timer
Active
Auto
Mode
Curren
t Day
Curren
t Time
Heater
ON
Current
Day
Current
Time
Heater
ON
Manual
Mode
Runtime Remaining
NOTE:
When Auto is visible, timers
are enabled
Current
Day
Day / Time
Auto or
Manual
Mode

Webasto SmarTemp Control 3.0 Specifications

General

Brand	Webasto
Model	SmarTemp Control 3.0
Category	Recording Equipment
Language	English