Marine heating system Installation Instructions
© Webasto Global Comfort Solutions
®
39
• Operate the heating system roughly once each month (also in summer) for approx.30
minutes to refresh the fuel in the pipes.
• After installation (and/or acceptance by an authorized Webasto
®
Partner) return the
guarantee card to Webasto
®
. Keep the purchase receipt.
• Inform the insurer of the installation (adjustment of the amount insured).
13 Maintenance and Service
Heating systems should only be repaired and maintained by an authorized Webasto
®
Partner.
Unskilled repair can endanger life!
This is both for your safety and for the safety of third persons.
Regular maintenance of the heating system is required for trouble-free operation.
• Before repair work, turn off the heating system and allow all parts to cool off.
• Disconnect the battery before starting repair work.
• Electrical welding: disconnect battery positive terminal, connect to ground
(control protection).
• Do not modify any parts relevant to the heating system.
• Replacing fuses: only use the prescribed fuse ratings.
• Only use original accessories/original parts/foreign parts approved by Webasto
®
Maintenance and service work comes due at the following intervals:
Annually:
• Check electrical plugs and sockets for corrosion.
• Clean or replace fuel filter.
• Check sealing of fuel hose.
• Check exhaust system for corrosion and sealing.
• Check combustion air intake, exhaust gas outlet, hot air intake and hot air outlet for
clearance.
• Check hot air hoses for damage.
Every 2 years:
• Check exhaust values (CO, CO2)
• Carry out PC diagnostics
• With high operating hours: clean burner and replace if necessary.
Every 10 years:
• Replace heat exchanger in hot air systems 10 years after first commissioning. Record the
installation date on the plate supplied. Affix the plate next to the heating system type plate.
To Next Page
Loading...
Need help?
General
