Webasto Thermo Top E User Manual

WARNING!
Hazard warning:
Incorrect installation or repair of Webasto heating systems may cause a fire or result
in the emission of carbon monoxide, which can be fatal. Serious or fatal injuries can
be caused as a result.
Specialist company training, technical documentation, specialized tools and
equipment are required to install and repair Webasto heating and cooling systems.
NEVER attempt to install or repair Webasto heating or cooling systems if you have not
successfully completed the company training and thereby acquired the required
technical skills or if you do not have access to the required technical documentation,
tools and equipment needed to carry out correct installation and repairs.
ALWAYS follow all Webasto installation and repair instructions and observe all
warning instructions.
Webasto does not accept any liability for defects and damage that are attributable to
an installation by untrained staff.
Feel the drive
Peugeot 207
Gasoline and diesel
From model year 2006
For left-hand drive vehicles only
Ident. no. 1311168A €10 fee © Webasto AG
Water Heater Unit
Thermo Top E Auxiliary
Heating
Thermo Top C Auxiliary
Heating
Thermo Top P Auxiliary
Heating
e1
00 0003
e1
00 0002
e1
00 0104

Webasto Thermo Top E Specifications

General

Brand	Webasto
Model	Thermo Top E
Category	Water Heater
Language	English

Summary

Introduction and Safety

Vehicle and Product Overview

Overview of the Peugeot 207, Webasto Water Heater Unit, and specific heater models.

Critical Hazard Warnings

Highlights severe risks from incorrect installation or repair, emphasizing expert knowledge.

Preparation and System Components

Installation Kit and General Guidance

Details on the installation kit, foreword, general installation rules, and necessary special tools.

Preliminary Work and Location Setup

Steps for preliminary work, battery disconnection, and identifying the heater unit installation location.

Electronics, Wiring, and Controls

Instructions for preparing electronics, wiring, relays, electrical connections, and control systems.

Optional Features Installation

Installation of optional remote start system and temperature sensor for specific models.

Core Installation Procedures

Heater Unit Preparation and Mounting

Steps for preparing the heater unit and its installation location, including drilling and mounting.

Water Connections for Gasoline Engines

Detailed instructions for connecting water hoses for gasoline engine variants.

Water Connections for Diesel Engines

Detailed instructions for connecting water hoses for diesel engine variants.

Combustion Air and Fuel Systems

Instructions for installing combustion air and fuel connection systems, including metering pump.

Exhaust System Installation

Steps for preparing and assembling the exhaust system for gasoline and diesel vehicles.

Finalization and Documentation

Final Work and System Checks

Procedures for reassembling components, securing lines, and performing final operational checks.

End User Operating Instructions

Guidance for end-users on setting up and operating the auxiliary heating system.

Installation Templates

Templates for petrol and diesel vehicle tank extracting devices for accurate installation.