Webasto Thermo & Comfort N.A., Inc. 36 www.techwebasto.com
Initial Start-up Thermo Pro 90
If you have any questions, contact our technical support team at (800) 860-7866 or via email at:
info-us@webasto.com
.
HEATER MUST
BE SWITCHED “OFF” WHEN REFUELING AT FILLING STATIONS
AND/OR WHILE LOADING OR UNLOADING FLAMMABLE MATERIALS FOR
TRANSPORT, TO PREVENT THE RISK OF EXPLOSION. PLEASE REVIEW OWNER’S
MANUAL FOR SAFETY AND USE INSTRUCTIONS.
COMBUSTION AIR INTAKE Complete
(Yes/No/Comments)
1
Is the combustion air intake drawing fresh air from a non-turbulent
location? (i.e. not in direction of travel)
2
Ensure air intake system is securely fastened.
HEATER FUNCTION Complete (Yes/No/
Comments)
1
Ensure heater starts and runs for a minimum of 20 minutes.
2
Ensure vehicle blower turns “ON”.
3
Ensure warm air is blown out of interior vents after blower is
activated.
4
Ensure timer (control device) is functioning.
5 Check and Modify CO2 setting as needed based on altitude (will the
heater “live” or spend a lot of time above XXXXXX Feet)
(See service manual for instructions to make adjustment)
COSMETICS Complete (Yes/No/
Comments)
1
Has the vehicle interior, engine compartment, trunk & glove
compartment been inspected for cleanliness after installation.
2
Has user manual placed in glove box?
3
Is the vehicle clock time correct after disconnecting the battery?
To Next Page