Webb WEH30 - Trouble Shooting

Before operating the machine, please ensure you are fully aware of the instructions, failure to do
so, could invalidate your manufacturer’s warranty.
1. For best results, place the lawnmower on the edge of the lawn, mow in a forward direcon.
2. Then at right angles at the end of each turn, slightly overlapping the previously cup strip.
3. The next me you mow the lawn, try to work at right angles to the previous cut. This will
help prevent unevenness in the soil surface, which can build up if you always mow in the
same direco
n.
TROUBLE SHOOTING
Problem
Answer
Fix
The lawnmower is not cung?
Grass is too high
Height adjustment required
Use suitable tool to reduce grass
height to below 40mm.
Adjust to suitable even height
Wheel does not turn?
Stone is lodged into gear of
wheel.
Foreign material between
cylinder & cuer bar.
Inspect & remove .
Wear gloves to protect hands
from blades and remove
material.
The cut is uneven?
The blade may be damaged
Height adjustment required
Visit your local Webb dealer to
have the blade inspected.
Adjust to suitable even height.
OPERATION