Thank you for your purchase of the WEBB PETROL SCARIFIER. This scarifier has been designed and
manufactured to our highest quality demands for durability and performance.
Webb is committed to offering durable products and quality after-market service. The scarifier is
warranted to be free from manufacturer defects in material and workmanship for a period of two (2) years
(Domestic use) from the date of purchase. This warranty will be void if the machine has not been operated
and maintained in the manner prescribed in this Operator's Manual. Any machine malfunctions, and/or
warranty claims that arise from the misinterpretation or the misunderstanding of the instructions and cautions
discussed in this booklet will not be eligible for warranty protection.
In order for the scarifier to perform at its optimum capabilities, the operator must read this manual
thoroughly before using this unit. This Operator's Manual contains important product operation procedures,
safety precautions, maintenance and troubleshooting tips as well as other advisories. Please keep this
manual nearby when operating the machine, as a reference should any questions arise.
The Webb Scarifier is a self-propelled scarifier designed for dethatching established lawns and large
grass covered areas. DO NOT USE SCARIFIER ON ANY OTHER SURFACE EXCEPT REAL GRASS
LAWNS. The machine should not be used for any other purpose than that stated above. The inappropriate
use of any machine can cause serious damage and/or bodily harm to the environment and operator. It is
imperative that the operator of this equipment be responsible for the operational environment of the scarifier.
Please be prepared and well-informed for all specific requirements precautions and work hazards that may
and/or do exist at the jobsite.
Powered by a Briggs & Stratton engine, the SCARIFIER is a powerful unit driving replaceable spring
steel flails on a reel for thorough dethatching. For optimum results, ensure that the lawn is mowed to its
normal cut height, and allowed to dry before commencing work. Power raking can damage wet grass,
particularly young growth. Inspect your jobsite for any debris such as rocks, wiring, string or and other items
that can become hazardous during work. Identify and mark all fixed objects to be avoided during work, such
as sprinkler heads, water valves, buried cables, or clothes line anchors etc. The jobsite environment, soil
conditions, job specifications and operator experience will all be factors that must be considered to select the
proper tool for the job. Failure to maintain the scarifier in a proper manner will lead to decreased productivity
of the tool and hazards to the operator and by standers. Do not use the machine if it has been modified or
improperly maintained.
All jobsites are different. Please ensure that when using the scarifier, all local bylaws and codes are
followed. All operators and mechanics of this machine should be trained in general machine use and safety.
Every care and effort has been made to ascertain the accuracy and completeness of procedures
described in this document to ensure your enjoyment and satisfaction. If you have any questions or
concerns, please contact your local authorized dealer.
PRODUCT SPECIFICATIONS
Damage to lungs if an effective dust mask is not worn.
Damage to hearing if sufficient hearing protection is not worn.
Damages to health resulting from vibration emission, if the power tool is being used over longer periods of
time or not adequately managed and properly maintained.
Before starting to use this machine, READ AND UNDERSTAND OPERATOR'S MANUAL PRIOR
TO USE OF SCARIFIER. Be thoroughly familiar with the controls and the proper use of the machine
before starting operations.
Before operating scarifier, ensure that it is structurally and mechanically safe by checking the
following:
Are all engine controls and the clutch action functioning within acceptable tolerances?
Is the drive belt in good condition?
Is the protective rubber skirt in place?
Before using the scarifier on proposed jobsite, perform the following environmental checks:
Inspect the entire work area for unexpected buried hazards, such as boulders, foundations,
and fencing.
Clean work area of any litter or debris, such as wire, boards, rocks, or any other potential hazards.
Know and mark the location of any and all buried utility lines or sprinkler systems. If in doubt,
always check with your local utilities provider for survey information and assistance.
Check for ventilation in area. Do not operate the scarifier or run the engine in unventilated areas.
Residual risks
Even when the power tool is used as prescribed it is not possible to
eliminate all residual risk factors. The following hazards may arise in
connection with the power tool's construction and design:
To Next Page
Loading...