EasyManua.ls Logo

Webb Werr17 - Blades and cutting system inspection; Technical specifications

Webb Werr17
22 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Users manual
13
6. Blades and cutting system.
Extreme care should be taken with blades.
Ensure the mower is off and the spark plug
lead disconnected from the spark plug, to
prevent accidental ignition.
Remove the catcher set the cutting height lever to
the highest level, and then hold up the rear
deflector in order to insp
ect your blade. Check
every few months to make sure they are not
damaged, loose, or overly worn. If loose, tighten,
but do not over-tighten, the nuts and bolts.
If you are planning to cha
nge the blades
yourself, use thick work gloves and take
extreme care at all times. A full range of
parts is available from your Authorised
Webb Dealer.
Technical specifications.
Model WERR17
Engine Briggs and Stratton 500 series
Displacement 158 cc
Rated power 2 kW
Tank capacity 965 ml
Engine oil capacity 591ml
Spark plug BR2LM, WPG3RF, RJ19LM, W9LMR-US or WR11E0
Rated speed 2800 rpm
Cutting width 430 mm
Adjustable cutting heights 6
Cutting height 21-77 mm
Grass collection capacity 55 litres
Noise level 96 dB (A)
Weight (including catcher) 32 kg
Chassis ABS

Related product manuals