EasyManua.ls Logo

Webb Werr17 - Fill fuel tank with unleaded petrol; Attach grass box or mulch plug

Webb Werr17
22 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8 Users manual
2. Fill fuel tank with unleaded petrol.
Petrol is highly flammable so extreme caution must be
taken when handling it. Always store petrol in approved
containers and you must ensure that you use fresh
petrol that is less than three months old. Do not mix oil
with petrol.
To put petrol in the fuel tank, firstly remove the warning
label from under the petrol cap. It’s best to fill the tank
using a clean funnel, but never fill it completely. Instead,
leave at least 13mm from the bottom of the filler neck to
allow for expansion. Ensure that you securely tighten the
petrol cap after filling.
3. Attach the grass box or mulch plug.
The grass catcher attaches easily by
lifting the mower’s rear deflector and
inserting the grass catcher.
Just lift the rear deflector with one hand and then
gently slide the catcher into position
(as shown i
n photo on right).
Your mower comes with a mulch plug, this
enables you to cut your grass without collection, the cuttings disappear into your lawn.
For efficient mulching you can only cut the top 1/3 of the height of your grass, cutting
more than 1/3 stops the mulching action. To attach the mulch plug simply remove the
grass catcher and insert the plug into the rear opening.
Alternatively you can remove the grass catcher and mulch plug to discharge the cuttings
from the rear of the machine.

Related product manuals