3
Contents
1. Introduction ..................................................................................................................... 4
2. Description ...................................................................................................................... 5
3. Technical data ................................................................................................................. 6
4. Safety ............................................................................................................................... 7
4.1. Information and safety stickers ........................................................................... 12
5. Operation....................................................................................................................... 13
6. Transport ....................................................................................................................... 19
7. Storage .......................................................................................................................... 19
8. Maintenance .................................................................................................................. 20
8.1. Maintenance overview .............................................................................................. 21
8.2. Description of the maintenance operations............................................................ 22
8.2.1. Check the engine oil level ................................................................................ 22
8.2.2. Change the engine oil ...................................................................................... 22
8.2.3. Change the fuel lter ........................................................................................ 23
8.2.4. Clean / change the main air lter ...................................................................... 24
8.2.5. Clean / change the secondary air lter.............................................................. 24
8.2.6. Adjust / replace the spark plug .......................................................................... 25
8.2.7. Change the tamping foot .................................................................................. 25
8.2.8. Change the oil in the tamping system .............................................................. 26
8.3. Operating uids and ll levels ................................................................................. 26