To Next PageTo Next Page
Need help?Do you have a question about the Weber mt CR 5 and is the answer not in the manual?
General| Brand | Weber mt |
|---|---|
| Model | CR 5 |
| Category | Vibratory rammers & tampers |
| Language | English |
General safety instructions, proper use, and consequences of non-compliance.
Defines misuse, safety during driving, and traffic regulations.
Lists essential personal protective equipment for safe operation.
Checks for work environment, obstacles, and protective fixtures before starting.
Safety precautions for operating in difficult conditions and poor ventilation.
Safety measures before performing maintenance or repair work.
Requirements for inspecting the compactor and recording results.
Guidelines for cleaning the compactor and the approved areas for tasks.
Proper methods for disposing of operating fluids and auxiliary materials.
Illustrates and labels the main components of the CR 5 compactor.
Explains the compactor's propulsion via a Hatz diesel engine.
Describes starting the engine, engaging vibration, and controlling movement.
Details the compactor's weight and physical dimensions.
Covers engine, speed, and vibration system specifications.
Specifies noise levels and hand-arm vibration data.
Explains the various fields and information on the machine's data plate.
Instructions for safely transporting and securing the compactor.
How to adjust the work height of the manual guidance rod.
Procedures for checking engine oil and fuel levels before operation.
Procedure for checking the hydraulic fluid level.
Steps for mounting attachment plates and the Poly pad.
Detailed steps for starting the Hatz diesel engine.
How to set gas lever and control speed/direction during compacting.
Steps for shutting down the engine and securing the parked machine.
Specific maintenance tasks required after the first 25 operating hours.
Daily or every 8 operating hours maintenance tasks.
Maintenance tasks for 150 operating hours, 6 months, and annually.
Maintenance tasks required every 250 operating hours.
Detailed steps for draining and refilling engine oil.
Instructions for cleaning or replacing the engine oil filter.
Procedure for replacing the fuel filter element.
Steps for cleaning or replacing the air filter insert.
Steps for draining and refilling oil in the exciter.
How to inspect the V-belt for wear and replace if necessary.
Lists required fluids, their specifications, and quantities for different subassemblies.
Troubleshooting steps for when the compactor fails to start.
Solutions for issues related to vibration or forward motion.
Troubleshooting steps for when the compactor does not switch on.
Steps for cleaning the compactor and preparing the fuel tank for storage.
Maintenance and storage of engine, exposed parts, and battery.
Contact details for WEBER Maschinentechnik GmbH in Germany.
Contact details for WEBER Technologie SARL in France.
Contact details for WEBER Maschinentechnik Sp. zo.o. in Poland.
Contact details for WEBER MT s.r.o. in Czech Republic.
Contact details for WEBER MT in USA and Canada.
