14 CR5
Shutdown
Bring the gas lever (1) into idle position.
Press the switch-off button (1).
Compacting
Control drive speed and direction of travel with the handle
(1).
1
Bring the gas lever (1) into full-throttle position.
1
The engine can only be switched off via the switch-off
button!
1
1
Only run machine within reach of the manual guidance
rod.
During breaks—even if they are short—the machine
must be shut down.
Parked devices that represent an obstacle must be
safeguarded against conspicuously.
To Next Page
Loading...
