EasyManua.ls Logo

Weber mt CR 5 - Pre-Start Activities; Transport and Securing Procedures; Guidance Rod Adjustment; Engine and Fuel Level Checks

Weber mt CR 5
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12 CR5
Transport
Fit the crane hook into the hinged lifting ring (1) and lift the
machine onto the desired means of transport.
1
Only use lifting machines with a minimum bearing ca-
pacity of 350 kg.
Arrest the manual guidance rod (1) with the spring bolt (2).
1
2
1
Adjust the desired work height of the manual guidance rod
with the set screw (1).
Adjusting the manual guidance rod
Open the cover (1), unscrew and remove the gas cap (2),
check the ll level, if necessary top off with clean diesel fuel
to the lower edge of the ller neck.
The correct oil level is between the min. and max. marks.
Checking the engine oil level
Pull the oil dip stick out of the crankcase.
Checking the fuel level
min: max
1
2
Activities prior to starting work
When transporting the soil compactor on a vehicle,
secure it with suitable restraints.
Do not step under suspended loads.
For work at the fuel system, have a suitable re-extin-
guishing agent at the ready.
Fire, naked light, and smoking is forbidden!

Other manuals for Weber mt CR 5

Related product manuals