Need help?Do you have a question about the Weber mt CR 6 and is the answer not in the manual?
Information presented on the machine's rating plate for identification and reference.
Description of the soil compactor, its sections, engine, and controls.
Importance of adhering to safety instructions to prevent hazards and damage.
Defines intended applications and highlights risks of non-intended use.
Addresses risks from machine proximity and the need for operator awareness of others.
Specifies operator age, training, and mandatory PPE for safe operation.
Identifies danger areas, prohibits unauthorized changes, and mandates original parts.
Essential checks before operation, including PPE and securing loose items.
Guidelines for safe engine start-up, monitoring, and parking the machine.
Precautions for fueling, avoiding spills, and contact with hot engine parts.
Safe cleaning methods and awareness of toxic exhaust gases.
Requirement for expert inspection to ensure ongoing operational safety.
Explains the meaning of DANGER, WARNING, CAUTION, ATTENTION signal words.
Steps for preparing the machine for its first use after unpacking.
Visual guide to machine parts and their operating positions.
Details on the MS 15 start module's operational status and oil pressure indicators.
Explains indicators for MS 25 and MS 35 start modules including charge and air filter status.
How to use the key switch for ignition and starting, with attention to starter damage.
Introduction to the COMPATROL system and its operational status indicator.
Explanation of compaction indicators, warning lights, and their meaning.
Essential visual and other inspections before starting work.
Step-by-step guide for safely starting the machine's engine.
How to operate the machine for compacting, including speed and system readings.
Correct steps for turning off the machine's engine.
Precautions for lifting the machine safely during loading and unloading.
Security measures for overnight or short-term storage.
Procedures for storing the machine for extended periods to prevent degradation.
Overview of why regular maintenance is crucial for machine performance and longevity.
Defines the necessary skills and training for individuals performing maintenance.
Critical safety steps to follow before, during, and after maintenance tasks.
Step-by-step guide for cleaning or replacing the air filter.
How to check the V-belt for wear and damage, and when to replace it.
Instructions for accurately checking the engine oil level.
Detailed steps for draining and refilling the engine oil.
Procedure for cleaning or replacing the engine oil filter.
Steps to drain water and fuel from the water separator.
Instructions for replacing the fuel filter.
Method for checking the hydraulic oil level via the view glass.
Steps for changing the oil in the machine's exciter.
Guide on how to access and replace blown fuses.
Instructions for connecting and using a permanent charger for the battery.
General| Brand | Weber mt |
|---|---|
| Model | CR 6 |
| Category | Vibratory rammers & tampers |
| Language | English |
To Next Page
