Why is the Weber Grill burner flame erratic?
If the burner flame pattern on your Weber Grill is erratic, the flame is low when the burner is on HI, or flames do not run the whole length of the burner tube, the burners may need cleaning. Clean the burners to resolve this issue.
How to prevent flare-ups on Weber 7171001?
To prevent flare-ups on your Weber Grill: 1. Ensure you preheat the grill by turning all burners on HI for 10 to 15 minutes. 2. Clean the cooking grates and Flavorizer® bars thoroughly if they are heavily coated with burned-on grease. 3. Clean the slide-out grease tray to ensure grease can flow into the catch pan.
Why does my Weber 7171001 burner have a yellow flame and smell like gas?
A yellow or orange flame, along with a gas smell, indicates a potential issue. This could be due to a blockage in the holes. To resolve this, clean the spider/insect screens. Other solutions include straightening the fuel hose and cleaning the burners. Also, make sure to hold the control knob in for two seconds after snapping the igniter and seeing the orange flame from the burner lighting tube. If problems persist, manually light the burner.
Why does the inside of my Weber 7171001 Grill lid look like it's peeling?
If the inside of your Weber Grill lid appears to be peeling, it's likely baked-on grease that has turned to carbon and is flaking off. This is not a defect. Clean the lid thoroughly.
How to fix erratic burner flame on Weber 7171001 Grill?
If the burner flame pattern on your Weber Grill is erratic, the flame is low when the burner is on HI, or the flames don't run the whole length of the burner tube, the burners may need cleaning. Clean the burners.
Why does my Weber 7171001 Grill lose heat in cold weather?
If your Weber Grill loses heat when cooking in cold weather (10°C/50°F or colder), it may be due to frost or ice on the outside of the LP cylinder. This indicates that the liquid propane is vaporizing too slowly to supply the burners. Turn off the burner control knobs and the LP cylinder, then replace it with a spare LP cylinder to resume cooking.
Why is the inside of my Weber Grill lid peeling?
The inside of your Weber Grill lid may appear to be peeling, but it is not paint. The lid is porcelain enamel or stainless steel. The peeling look is due to baked-on grease that has turned to carbon and is flaking off. This is not a defect. To resolve this, clean the lid thoroughly.
Why does my Weber 7171001 Grill have flare-ups?
Flare-ups in your Weber Grill can occur for several reasons: * The grill may not be preheating correctly: Ensure all burners are on HI for 10 to 15 minutes during preheating. * The cooking grates and FLAVORIZER BARS may be heavily coated with burned-on grease: Clean them thoroughly. * The slide-out grease tray may be dirty, preventing grease from flowing into the catch pan: Clean the slide-out grease tray.
How to fix erratic burner flame on my Weber 7171001?
If the burner flame pattern on your Weber Grill is erratic, the flame is low when the burner is on HI, or the flames do not run the whole length of the burner tube, clean the burners.
What to do if Weber Grill burner does not light?
If your Weber Grill burner doesn't light, or the flame is low in the HI position, consider the following: * Refill the LP tank if the fuel is low or empty. * Straighten the fuel hose if it is bent or kinked. * Clean the burners. * When igniting, hold the control knob in for two seconds after seeing the orange flame from the burner lighting tube. * If the igniter doesn't work, try manually lighting the burner. Call Customer Service if needed.
General| Model | 7171001 |
|---|---|
| Category | Grill |
| Type | Gas Grill |
| Fuel Type | Propane |
| Burners | 3 |
| Grate Material | Porcelain-Enameled Cast Iron |
| Material | Stainless Steel |
| Color | Black |
| Warranty | 10 years |
To Next Page
