Weber 900 LP - Page 9

Plastic buttons (2)
(actual size)
1/4-20 wing nuts (2)
(actual size)
1/4 inch nylon washers (11)
Hair pin cotters (2)
Wheel hubcaps (3)
1/4-20 keps nut
Phillips screws/washers (2)
Check contents of hardware packs
Burner control knobs (3)
Tool holders (3)
Tubing plugs (7)
(two are spares)
Support rod holder
Swing table end bracket
Hinge pins (2)
(hardware size: 1/4 x 1 1/2 inch clevis pin)
(actual size)
1/4-20 x 2 inch bolt
(actual size)
1/4-20 x 1 3/4 inch bolts (2)
(actual size)
1/4-20 x 1/2 inch bolts (6)
(actual size)
9