Table of contents
Safety instructions 3
Protocol for initial commissioning by a qualified technician 4
EC - Declaration of conformity 5
Description of the machine 6
Technical data 6
Unpacking 6
Installation 6
Electrical connection 7
Maintenance 7
Mounting the wheel guard 8
Mounting the clamping shaft 8
Display 9
Control panel 10
Wheel clamping 11
Correct handling of the clamping shaft and quick-release nut 12
Working with the wheel balancer 13
Self Calibration 15
Balancing programs 16
Installation of the Motorcycle Clamping Axis (Accessory) 16
Troubleshooting 18
The information in this manual has been carefully checked, but errors cannot be completely excluded. This
manual is intended for users with technical knowledge in the field of vehicle inspection and repair. Subject to
technical and content changes.
Latest update of the manual: June 2016.
To Next Page
Loading...
