weBoost DRIVE SLEEK Installation Guide

ENGLISH
4
CELL PHONE SIGNAL BOOSTER DRIVE SLEEK
The included Velcro
®
can be used to mount the booster
out-of-the way on the floor under a seat or mounted to the
side of the trunk. It is best to mount in a place where the
cables cannot be tripped over or snagged (damaging the
booster).
______
(STEP 2 cont.)
Connect the cable from the outside antenna to the booster
port labeled
ANTENNA
by simply pressing the connector in
until you hear a “click”.
ANTENNA
cable from
outside antenna
booster
Velcro
®
NOTE: Connecting cable from outside antenna to booster does not
take much force.
NOTE: The “hook” side of the Velcro
®
(already on the booster) can be
used to attach to the carpet of many vehicles.
bottom side of booster

weBoost DRIVE SLEEK Specifications

General

Max Gain	23 dB
Connectors	SMA
Impedance	50 Ohms
Bands Supported	Band 12/17, Band 13, Band 5, Band 4, Band 2
Power Source	Vehicle 12V outlet