(LIGHT PATTERNS cont.)
BLINKING RED, THEN SOLID GREEN — This indicates that one or
more of the booster bands has shut down due a feedback loop
condition called oscillation. This same condition causes the
screeching sound when a public address system microphone gets
too close to a speaker. This is a built in safety feature that causes
the booster to reduce it’s power to prevent harmful interference
with a nearby cell tower. Refer to the Troubleshooting section.
SOLID RED — This is due to a feedback loop condition called
oscillation. This same condition causes the screeching sound
when a public address system microphone gets too close to a
speaker. This is a built in safety feature that causes a band to shut
o to prevent harmful interference with a nearby cell tower.
Refer to the Troubleshooting section.
CELL PHONE SIGNAL BOOSTER
15
To Next Page
Loading...
