Weed Eater FX26S User Manual

_) Tradema[k
B
&
Please do not return unit to retailer.
Por favor, no devuelva el aparato al lugar de compra.
Veuillez ne pas retourner I'outil au detaillant.
• 1-800-554-6723
www.weedeater.com
Instruction Manual
Manual de Instrucciones
Manuel d'lnstructions
FX26S B
For Occasional Use Only
WARNING:
Read and follow all Safety Rules and Operating Instructions before
using this product, Failure to do so can result in serious injury,
ADVERTENOIA:
Lea el manuaI de instrucciones y siga todas Ias advertendas e
instrucciones de seguridad, Et no hacerlo puede resultar en Iesiones
graves.
AVERTISSEMENT:
Lire le manuel d'instructions et bien respecter tous Ies avertisse-
ments et toutes Ies instructions de securit& Tout defaut de tefaire
pourrait entrafner des blessures graves.
WEED EATER WEED EATER
1030 Stevens Creek Road 6150 McLaughlin Road
Augusta, GA 30907 Mississauga, Ontario L5R4C2
545186737 Rev. 1 4/15/08 BRW

Weed Eater FX26S Specifications

General

Power Source	Gasoline
Engine Type	2-Cycle
Engine Displacement	25.4 cc
Weight	10.5 lbs
Line Diameter	0.095 inches
Shaft Type	Straight
Handle Type	Loop
Cutting Width	17 in

Summary

Safety Rules

Safety Information on the Unit

Covers specific warnings and instructions for safe operation of the unit itself.

Operator Safety

Guidelines for the operator's personal safety, including protective gear and alertness.

Unit/Maintenance Safety

Safety precautions related to the unit's maintenance and general handling.

Fuel Safety

Essential safety measures for handling and storing fuel.

Cutting Safety

Transporting and Storage

Assembly

Adjusting the Handle

Instructions for correctly positioning and securing the assist handle.

Attaching Shield

Operation

Know Your Trimmer

Familiarization with the controls and components of the trimmer.

Stop Switch

How to use the switch to safely stop the engine.

Primer Bulb

Explanation of the primer bulb's function for starting.

Choke

Guidance on using the choke lever for cold starts.

Starting Engine

Starting a Cold Engine

Step-by-step guide for starting the engine from a cold state.

How to Stop Your Unit

Procedure for safely stopping the engine.

How to Start Your Unit

General instructions for starting the trimmer engine.

Trimmer Line Advance

Cutting Methods

Maintenance

Check for Loose Fasteners and Parts

Ensuring all screws, nuts, and parts are secure before use.

Check for Damaged or Worn Parts

Identifying and addressing parts that need replacement or repair.

Inspect and Clean Unit and Labels

Routine cleaning and inspection of the unit and its labels.

Clean Air Filter

Procedure for cleaning the air filter to maintain engine performance.

Service and Adjustments

Line Replacement

Instructions for replacing the trimmer line.

Carburetor Adjustment

Guidance on adjusting the carburetor for optimal engine performance.

Storage

Seasonal Storage

Steps for preparing the unit for extended periods of non-use.

Fuel System

Information on fuel stability and handling for storage.

Troubleshooting Table

Limited Warranty