EasyManua.ls Logo

Wega MyConcept EVDP 3GR User Manual

Wega MyConcept EVDP 3GR
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
WEGA MACCHINE PER CAFFÈ S.r.l.
Via Condotti Bardini, 1 - 31058 SUSEGANA (TV) - ITALY - Tel. +39.0438.1799700 - Fax +39.0438.1884890 - www.wega.it - info@wega.it
2006/42/CE Direttiva macchine
EVDP
ESPRESSO COFFEE MACHINE
Use and maintenance manual. TECHNICIANS instructions.
FONDO VERDE CHIARO PANTONE 376C
LOGO VERDE SCURO PANTONE 348C
FONDO VERDE CHIARO C:56; M:0; Y:100; K:0
LOGO VERDE SCURO C:100; M:0; Y:79; K:28

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Wega MyConcept EVDP 3GR and is the answer not in the manual?

Wega MyConcept EVDP 3GR Specifications

General IconGeneral
BrandWega
ModelMyConcept EVDP 3GR
CategoryCoffee Maker
LanguageEnglish

Summary

Installation and Commissioning

3. TRANSPORT AND HANDLING

Covers safety precautions, PPE, dimensions, and procedures for transporting and handling the machine.

5. INSTALLATION

Covers all aspects of machine installation, including safety, environmental conditions, connections, and support base requirements.

5.7 Hydraulic connection

Details the procedures for connecting the machine to the water supply, including materials and connections.

5.8 Electrical connection

Covers safety standards, protection switches, and procedures for the electrical connection of the machine.

6. COMMISSIONING

Outlines safety precautions and steps for bringing the machine into operation after installation.

6.5 Turning the machine on and off

Details the procedure for powering the machine on and off, including start-up sequences and checks.

6.6 Water replacement

Provides a step-by-step procedure for replacing water in the hydraulic circuits after installation or long inactivity.

Parameter Programming and Configuration

8.1 Access Methods

Describes accessing programming via USB stick or password, including specific steps for each.

8.2 Programming Menu Overview

Summarizes the programming sections, parameters, and planned operations available within the machine's menu.

8.4 Services and Coffee Tuning

Details services tuning (pressure, temperature), coffee tuning, and recipe management for optimized performance.

8.6 Maintenance Thresholds and Parameter Reset

Manages maintenance thresholds, USB operations, inspections, counters, and parameter resets.

Connectivity, Maintenance, and Troubleshooting

10. MAINTENANCE AND CLEANING

Covers general instructions, safety precautions, and required PPE for performing maintenance and cleaning.

Related product manuals