Need help?Do you have a question about the Wega Concept and is the answer not in the manual?
General| Brand | Wega |
|---|---|
| Model | Concept |
| Category | Coffee Maker |
| Language | English |
Safety and installation instructions for qualified personnel.
Guidelines for positioning, hydraulic connections, and wiring.
Instructions for programming coffee and hot water doses, and preparing beverages.
Installation, cleaning, and operation of the cappuccino maker for milk frothing and heating.
System for automatic milk heating and foaming, including operation and cleaning.
Guidelines for placing the machine on a stable base with adequate space and proper alignment.
Detailed instructions for connecting water supply, softener, and drain pipes according to safety standards.
Instructions for safely connecting the machine's power cable and motor pump cable.
Steps to adjust the operating pressure of the external motor pump.
Process for initial machine setup, including running deliveries to flush the hydraulic circuit.
Details on the composition, operation, heating, and safety of the delivery group.
Procedure to program desired coffee dose quantity for each selection button.
Steps for making coffee using programmed doses and stopping delivery.
Overview of the Autosteamer system for automatic milk heating and foaming.
Procedure for automatically heating and foaming milk to a preset temperature.
Explanation of the operating principles of the autosteamer system, including steam and air flow.
Periodic checks for pressure switches, lime scale, solenoid valves, and hydraulic leaks.
Troubleshooting guide for electronic system shutdowns, pump issues, and coffee quality problems.
Troubleshooting guide for display messages related to water level, temperature, probes, and heating elements.
Steps to enter the machine's programming menu using the USB drive and ENTER button.
Explanation of how to navigate the programming menu using the browser key.
Overview of the four screens of the programming menu and a recap of menu items.
Procedure to adjust the pressure in the services boiler for hot water and steam.
Setting machine start-up times and group stand-by periods for energy saving.
Enabling/disabling the autosteamer and setting its operating temperature.
Installation and communication protocol details for the CREDIT-DEBIT system.
Installation and configuration for connecting the machine to an external interface for payment processing.
Table mapping selection codes, water, group, relay, and I/O connector assignments.
Operating principle for the DEBIT-CREDIT system where beverages are paid for after delivery.
To Next Page
