To Next PageTo Next Page
Need help?Do you have a question about the Wega Polaris 1GR and is the answer not in the manual?
General| Brand | Wega |
|---|---|
| Model | Polaris 1GR |
| Category | Coffee Maker |
| Language | English |
Carefully read every part of this booklet before using the appliance.
The manufacturer reserves the right to make any improvements and/or modifications to the product.
After removing the packaging, check the condition of the appliance. If in doubt, do not use it.
15 months on all components, except for electrical and electronic components and expendable pieces.
Indicates symbols that must be strictly followed to avoid damage or injury.
The water supply must be carried out with water suitable for human consumption.
Only components supplied with the appliance are to be used.
Installer must carry out connections in accordance with hygiene and safety norms.
After installation, appliance must be started and left in 'ready to operate' for 30 minutes.
Components used must ensure hygiene and safety requirements are met, using original spare parts.
Identifies various parts of the machine using numbered labels.
Provides specifications like power supply, absorbed power, boiler capacity, pressure, and operating conditions.
Describes the functions of the individual buttons on the machine's control panel.
Steps to start the machine with electric heating for EMA/EPU versions.
Steps to start the machine with electric heating for EVD version.
Instructions for starting the machine using gas heating, including safety precautions.
Steps to start the machine with combined electric and gas heating.
Importance of a dosing-grinding device and proper coffee grinding and dosing.
Steps to fill the filter with ground coffee and prepare the filter holder.
How to turn on the work area and side lighting.
Procedure for preparing coffee using the EMA version.
Procedure for preparing coffee using the EPU version.
Steps for programming and preparing coffee using the EVD version.
How to dispense coffee, stop delivery, and use manual dispensing.
Steps to dispense hot water using EMA/EPU versions.
Programming and dispensing hot water using the EVD version.
How to dispense steam for heating liquids and foaming milk.
Overview of the Autosteamer system for heating and foaming milk.
Step-by-step guide on how to operate the Autosteamer.
How to adjust the operating temperature of the Autosteamer.
How to use the cup heater for EMA/EPU versions.
How to use the cup heater for EVD version.
How to adjust the cup heater temperature for EVD version with display.
How to access the programming menu and navigate through parameters.
How to set the hour, date, and day of the week.
How to program the automatic switching on time of the machine.
How to program the automatic switching off time of the machine.
How to program machine shutdown for rest days.
How to program automatic alert for water softener regeneration.
How to view and reset the liter counter.
How to set the language displayed on the machine.
How to program the temperature and activation of the cup heater.
How to program the operating temperature of the autosteamer.
Control and resetting of doser alarms.
How to restore factory settings.
How to view the total work performed by the machine.
How to reset the totals of individual dose buttons.
How to reset the water liters total for softener regeneration.
Explanation of the softener, its function, and regeneration process.
Instructions for using and cleaning the cappuccino maker.
How to use and adjust the milk foaming nozzle.
Procedure for automatic washing of the brewing unit.
General cleaning operations for functional parts, accessories, and body panels.
