Wega Polaris 1GR User Manual

57
Polaris
ENGLISH
User manual
14 Reading and resetting of data
14.1 Totals
To view the total of the work performed by the
machine, proceed as follows:
t Press the STOP/PROG. button of the right push-
button panel for at least 5 seconds until the
display shows the total number of selections
carried out;
t by pressing the
STOP/PROG key
repeatedly (the
LEDs of dierent keys are turned on), you can
see the number of selections made by the corre-
sponding key;
t to exit from the
total, repeatedly
press the STOP/PROG button until it returns to
selection mode.
i
After 10 seconds of inactivity the system
automatically exits from the menu.
TOTAL COFFEES
00000000
COUNTERS
00000000
14.2 Resetting of the Totals
To reset the totals of the individual dose buttons,
proceed as follows:
t Press the STOP/PROG. button on the right push-
button panel and keep it pressed for at least 5
seconds;
t Press the (-) but-
ton to start the
resetting
;
t to conrm the re-
setting, press the (+) button and keep it pressed
for 3 seconds.
i
The above-indicated procedure allows for the
carrying out of the resetting of the individual
selections, but not the total resetting of the
machine (life of the machine).
RESET COUNTING ?
PRESS + 3 SEC.
DATA RESET
14.3 Resetting of the water liters total for
softener regeneration
t Simultaneously press the(MODE ),(ENTER
), (+ ) and (- ) buttons of the right
push-button panel until the message “00000 “
appears on the display;
t to bypass regeneration control, set a value of
00000 litres.

Wega Polaris 1GR Specifications

General

Brand	Wega
Model	Polaris 1GR
Category	Coffee Maker
Language	English