Wega Polaris 1GR User Manual

48
Polaris
User manual
10 Preparing hot beverages
Programming
t Place the jug under the hot water nozzle (13) ;
t press the STOP/PROG button of the right push-
button panel until all the dose button leds light
up;
t press the hot water dispensing button (
);
t upon reaching the desired dose, confirm by
pressing the hot water dispensing button
(
) again;
t press the “STOP/PROG” button to exit the pro-
gramming phasep.
10.1 Dispensing of hot water
(EMA / EPU Versions)
t Place the jug under the hot water nozzle (13);
t press the hot water button ( ): wait for the
water to be dispensed;
t to stop delivery in advance, press the hot water
delivery button again or press the STOP/PROG.
button.
10.2 Dispensing of hot water (EVD version)
9.4 Coee delivery
t Place the coee cup under the dispensing spout;
t press the desired dose key and wait for coee to
be dispensed.
i
To stop dispensing water ahead of time, press the
STOP/ PROG button or press the button you selected
again.
If the push-button panel is blocked, use the
“Manual dispensing” button.
Dispensing
t place the jug under the hot water nozzle (13) ;
t Press the hot water button ( ): wait for the
water to be dispensed;
t to stop delivery in advance, press the hot water
delivery button (
) again or press the STOP/
PROG button
!
Carefully operate the steam nozzle using the anti-
burn rubber bulb (5) and never touch the steam
nozzle (6) or the hot water nozzle (13): contact
with the hot water or steam may be harmful to
individuals, animals or property.
STOP
PROG.
1
Espresso
(Mode)
1 Large
coee
( + )
Stop/
Continuous/
Programming
2
Espressos
(Enter)
Manual
dispensing
2 Large
coees
( - )

Wega Polaris 1GR Specifications

General

Brand	Wega
Model	Polaris 1GR
Category	Coffee Maker
Language	English