54
Polaris
User manual
13.5 Programming of rest days
To program machine shutdown for rest day(s),
follow the instructions below:
t Enter into programming until the following ap-
pears on the dis-
play:
t choose the ma-
chine’s /day/s of
rest by scrolling with the (+
) and (- )
buttons;
t disable or reactivate the desired day/s of rest us-
ing the (ENTER
) button.
Example of machine shutdown on Tuesday and
Thursday
.
13.4 Programming the Switching O
Programming of the automatic switching o of
the machine:
t Enter programming until the following appears
on the display;
t set the switching
o time of the ma-
chine using the (+
) and (- ) buttons;
t press the (ENTER
) button to switch from
hours to minutes and vice versa;
t to move on to the next programming, press the
(MODE
) button;
t to disable the “O” function, set the time to 00:00
.
13.3 Programming the Switching On
Programming of the automatic switching on of
the machine:
t Enter programming until the following appears
on the display;
t set the switching
on time of the ma-
chine using the (+
) and (- );
t press the (ENTER
) button to switch from
hours to minutes and vice versa;
t to move on to the next programming, press the
(MODE
) button;
t to disable the “O” function, set the time to 00:00
.
13.2 Programming the Clock
Changing of the hour, date and day of the week:
t Enter programming until the following appears
on the display;
t use the (+
)
and (-
) but-
tons to modify the
parameter during the ashing phase;
t press the (ENTER
) button to move on to
the next parameter ;
t to move on to the next programming, press the
(MODE
) button.
WORKING DAYS
1234567
CLOCK SET-UP
09:16 18-10-12 1
AUTO ON/OFF
ON 08:00
AUTO ON/OFF
OFF 23:00
i
The machine will remain o on the days in which
the Day O function “ - “ has been activated.
WORKING DAYS
1234567
WORKING DAYS
1-3-567
Table of the days of the week
12 3 4 5 6 7
Monday Tuesday
Wednesday
Thursday Friday Saturday Sunday
Example of machine with no days set for shut-
down.