Wega Concept - Adjustment of coffee water temperature; Adjustment of the groups temperature

40
Wegaconcept
Technical manual
23.6 Adjustment of the groups
temperature
To modify the temperature of the single delivery
groups, proceed as follows:
X Dispensing group.
Y Group temperature.
ENTER
(x 5 secs.)
Hold down the ENTER button for at least 5 seconds.

Scroll the menu until the item is highlighted
01 SERV. BOILER PRESS
02 COFFEE WATER TEMP.
03 GROUPS TEMPERAT.
04 CUP HEATER TEMP.
ENTER Con rm to access the menu
TEMPERATURE GROUP. X
Y °C

Scroll the menu until the group which needs the tem-
perature to be adjusted is selected: all the keys of the
selected group will be highlighted.

Modify the parameter: increase or decrease
ENTER Con rm to exit the menu.
01 SERV. BOILER PRESS
02 COFFEE WATER TEMP.
03 GROUPS TEMPERAT.
04 CUP HEATER TEMP.

To exit the programming menu
23.5 Adjustment of co ee water
temperature.
To modify the outlet water temperature from the
co ee delivery group proceed as follows:
X Dispensing group.
Y Dispensed water temperature.
ENTER
(x 5 secs.)
Hold down the ENTER button for at least 5 seconds.

Scroll the menu until the item is highlighted
01 SERV. BOILER PRESS
02 COFFEE WATER TEMP.
03 GROUPS TEMPERAT.
04 CUP HEATER TEMP.
Enter Con rm to access the menu
WATER TEMP. COFFEE X
YY °C

Scroll the menu until the group which needs the tem-
perature to be adjusted is selected: all the keys of the
selected group will be highlighted.

Modify the parameter: increase or decrease
ENTER Con rm to exit the menu.
01 SERV. BOILER PRESS
02 COFFEE WATER TEMP.
03 GROUPS TEMPERAT.
04 CUP HEATER TEMP.

To exit the programming menu