Wega Concept - Delivery check

47
Wegaconcept
Technical manual
ENGLISHProgramming
22.16 Setting the language
To set the displayed language, proceed as follows:
ENTER
(x 5 secs.)
Hold down the ENTER button for at least 5 seconds.

Scroll the menu until the item is highlighted
13 NEW PROGRAM
14 DELIVERY TEST
15 GROUP WASHING
16 NUMBER OF GROUPS
ENTER Con rm to access the menu
LANGUAGE
ENGLISH
< EXIT AND 'OK' TO CONFIRM

Select the language to use
ENTER Con rm to exit the menu.

To exit without changes.
GR1, GR2, GR3, GR4 = time of delivery
expressed in seconds.
23.17 Delivery check
To set the type of delivery check, proceed as
follows:
TIMER MODE:
During the delivery, time scanning (10 seconds) is
displayed for each group.
At the end of the selections the time count stops and
is displayed for 10 seconds.
NO:
By setting "NO", the machine doesn't perform any
control during delivery time.
By con rming the new language, the machine will
delete the previous language; once done, the machine
will load the new language.
Afterwards, the machine will restart.
When it's on again, the displayed text will be in the
last language selected.
It is possible to choose one of the following
languages:
Italian•
English °C•
English °F•
French•
German•
Spanish•
Portuguese•
ENTER
(x 5 secs.)
Hold down the ENTER button for at least 5 seconds.

Scroll the menu until the item is highlighted
13 NEW PROGRAM
14 DELIVERY TEST
15 GROUP WASHING
16 NUMBER OF GROUPS
ENTER Con rm to access the menu
DELIVERY TEST
XXXX

Modify the setting.:
NO / TIMER / FLOW / TEMPERATURES
ENTER Con rm to exit the menu.
13 NEW PROGRAM
14 DELIVERY TEST
15 GROUP WASHING
16 NUMBER OF GROUPS

To exit the programming menu
1,2 Bar Press 3,5
08:30 20-MAY-2010
TIME GR1 GR2 GR3 GR4
XX-XX-XX XX
i
If the operation fails, it will be necessary to
manually turn the machine o and back on, while
the USB drive is inserted.