Wega Concept - 23.14 Setting the Date; 23.15 Setting the Working Days

46
Wegaconcept
Technical manual
23.15 Setting the working days
To program the start-up and shutdown of the
machine, proceed as follows:
ENTER
(x 5 secs.)
Hold down the ENTER button for at least 5 seconds.

Scroll the menu until the item is highlighted
09 FILTER REGENERAT.
10 COUNTERS
11 CLOCK SETUP
12 WORKING DAYS
ENTER Con rm to access the menu
WORKING DAYS
1 2 3 4 5 6 7

Scroll the menu until the parameter to be highlighted
is modi ed

Enable or disable the working day.

Switch to another day and repeat the operation
ENTER Con rm to exit the menu.
09 FILTER REGENERAT.
10 COUNTERS
11 CLOCK SETUP
12 WORKING DAYS

To exit the programming menu
1 Monday
2 Tuesday
3 Wednesday
4 Thursday
5 Friday
6 Saturday
7 Sunday
23.14 Setting the date
To set the time and date shown on the display,
proceed as follows:
ENTER
(x 5 secs.)
Hold down the ENTER button for at least 5 seconds.

Scroll the menu until the item is highlighted
09 FILTER REGENERAT.
10 COUNTERS
11 CLOCK SETUP
12 WORKING DAYS
ENTER Con rm to access the menu
CLOCK SET-UP
H:M DD-MM-YY D

Scroll the menu until the item to be modi ed is high-
lighted

Modify the parameter

Switch to another parameter and repeat the operation
ENTER Con rm to exit the menu.
09 FILTER REGENERAT.
10 COUNTERS
11 CLOCK SETUP
12 WORKING DAYS

To exit the programming menu
H hours
M minutes
DD day 1 Monday
MN month 2 Tuesday
YY year 3 Wednesday
D day of the week

4 Thursday
5 Friday
6 Saturday
7 Sunday
Legend
i
By setting the “-” character the machine will stay o
or in energy saving mode depending on the day of
the week (example 1 2 - 4 5 6 7 : the machine stays
o on Wednesdays).