Wegener iPump - Safety Summary; Glossary of Terms

iPump Quick Start Guide 11
800009-02 Rev.B
Press Display / Field Details Field Type
a)
UNIT SETUP
Menu
b)
ENTER
RECORD AND PLAY
Menu
c)
DECODER SETUP
Menu
d)
ENTER
DECODER NUMBER
1
User Input -
Selectable
Available decoders are 1 and 2.
If your iPump has only one
decoder, this Decoder
Number screen will not
appear. Instead, the Decoder
Setting Select screen
described in step e) will
appear.
e)
DECODER SETTING SELECT:
FOLLOW TUNE
User Input -
Selectable
FOLLOW TUNE
accepts the
program selection from the
current RF setup and sends
you back to the Decoder Setup
screen.
PROGRAM
allows you
to select a particular program
from the stream.
OFF
turns off
the decoder.
If
PROGRAM
is selected, go on to step f). Otherwise your
decoder setup is complete.
f)
ENTER
ENTER PROGRAM NUMBER:
001
User Input -
Selectable
Number of program to select
from stream. Available
program numbers are
dependent on transport
stream.
Your decoder setup is now complete. The selected program will
begin playing from the selected decoder.