WeGo HYBRID User Manual

3
WeGo™ HYBRID User Manual
Charging Your HYBRID
Please fully charge your HYBRID before first use, and remove the plastic cling that is affixed
to the HYBRID’s top panel.
To charge, use the included USB charger. Lift the silicone flap on the side of the HYBRID
to expose the port and plug the smaller end of the charger into it. Now plug the other end
into either a USB port on a computer or a charging station that plugs into a wall outlet (not
included with your purchase of the HYBRID).
The display will illuminate showing you that the device has started charging. A complete
charge should take approximately 3 to 4 hours.
Once fully charged your HYBRID is ready to be synced with your smartphone or tablet.
The HYBRID will run for approximately 7 days once fully charged. When the device is running
out of battery power, a “LOW BATTERY” message will appear on the display as a reminder
to charge your HYBRID.

WeGo HYBRID Specifications

General

Brand	WeGo
Model	HYBRID
Category	Medical Equipment
Language	English