WeGo HYBRID User Manual

5
WeGo™ HYBRID User Manual
Syncing Your HYBRID
Make sure that Bluetooth is enabled on your phone before proceeding.
To initiate the sync, open the app and make sure you are in the Dashboard. If you are not
in the Dashboard press the menu icon (3 solid lines) and select.
Next, press the sync icon on the top right which will open up instructions to help you properly
transfer data from your device to the app.
Once completed, you will receive a “SUCCESSFUL SYNC” message, and the device will
go back to the normal display with the app showing all updated data.
Please note: A sync should be performed before you start using your new device.

WeGo HYBRID Specifications

General

Brand	WeGo
Model	HYBRID
Category	Medical Equipment
Language	English