7
WeGo™ HYBRID User Manual
Using Your HYBRID During Sleep Sessions
How to Wear During Sleep
It is recommended to keep the HYBRID on
your wrist while you sleep. This will give you
the most accurate sleep analysis.
Initiating the Sleep Mode
• Tap the main button once or double tap to
activate the display.
• As you scroll through the different metrics,
the Sleep screen should show “PRESS TO
SLEEP” scroll text and a picture of a bed.
• Next, hold down the main button for about
5 seconds and the display will show a
timer and bed icon.
• Once a sleep session is successfully
activated, a “GOOD NIGHT” message will
scroll onto the screen, the unit will vibrate,
and the display will fade out.
Waking from Sleep Mode
• Tap the main button once to activate the
display. You will see the current sleep
session in progress.
• Next, hold down the main button for about
5 seconds and a “GOOD MORNING”
message will appear indicating your sleep
session has been completed.
• Remember to sync your HYBRID and
review your sleep data.
Frequency of Sleep Mode
• You can enter into and out of multiple
sleep sessions during a 24 hour period.
The HYBRID device will record these and
you can view the data on the Join WeGo™
app after you sync the device.
To Next Page
Loading...
Need help?
General
