M33 PowerKit Engine Operating and Maintenance Manual
DPK-MAN-EN-M33-0000-19-12-20
Société Internationale des Moteurs Baudouin Baudouin.com
Technoparc du Brégadan, 13260 Cassis, France (T) +33 488 688 500 (F) +33 488 688 501 12 of 55
SAS au capital de 33 311 180 € │R.C. Marseille 509 985 735 │Siret 509 985 735 00026
TVA intracommunautaire: FR 79 509 985 735 │ APE: 28111 – 08
Cleaning the Engine
Use personal protective equipment when cleaning an engine.
Regularly clean the engine surface to remove any greasy deposits that may be
flammable.
Do not wash an engine in operation or which has just stopped.
Use the safety equipment required by your cleaning equipment.
Make sure high-pressure water cannot damage the equipment being washed. Do not
get electrical equipment or seals wet.
Take necessary precautions when using a high-pressure cleaner. Comply with the
safety instructions indicated for the cleaning equipment used.
High pressure cleaning can blow out debris from the engine which can cause injury.
Sealing
When the temperature exceeds 300°C (572°F), seals made of VITON produce
corrosive hydrofluoric acid. Always use protective gear when touching seals subject
to high temperatures.
Use thick rubber gloves and safety goggles during decontamination operations.
Clean the seals and contaminated surfaces using an 11% calcium hydroxide solution
or another cleaning product.
Keep all parts that have been removed in sealed plastic bags and store them in areas
dedicated to this purpose.
To Next Page
Loading...
Need help?
General
