Weider 8507 - Assembly: Seat and Leg Lever; Leg Lever, Seat Frame, Pad Tubes, and Seat Knob

14
26. Press a 1 1/2” Square Inner Cap (32) into the Leg
Lever (29).
A
ttach the 5/16” x 2” Eyebolt (62) to the Leg Lever
(29) with a 5/16” Washer (8) and a 5/16” Nylon
L
ocknut (3).
Lubricate a 5/16” x 2 1/4” Bolt (33). Attach the Leg
Lever (29) to the Seat Frame (36) with the Bolt and
a 5/16” Nylon Locknut (3). Do not overtighten the
Nylon Locknut; the Leg Lever must be able to
pivot freely.
27. Set the bracket on the Seat Frame (36) onto the
indicated pin on the Front Upright (42). Attach the
Seat Frame with a 5/16” x 2 3/4” Carriage Bolt (14)
and the Seat Knob (40).
28. Press 3/4” Round Inner Caps (34) into the ends of
a Pad Tube (28). Insert the Pad Tube into the Seat
Frame (36). Slide a Pad (30) onto each end of the
Pad Tube.
Press 3/4” Round Inner Caps (34) into the ends of
the other Pad Tube (28). Insert the Pad Tube into
the Leg Lever (29). Slide a Pad (30) onto each end
of the Pad Tube.
26
27
28
36
29
14
40
32
8
62
36
42
Pin
3
3
33
29
36
34
30
34
30
28
All manuals and user guides at all-guides.com