Weider 9250 - Seat Assembly

19
45. Attach the Shroud (59) to the bracket on the Top
Frame (55) with two M6 Washers (78) and two
M6 x 16mm Bolts (18).
Attach the Shroud (59) to the bracket on the Base
(4) with two M6 Washers (78) and two M6 x
16mm Bolts (18).
46. Insert the M6 x 50mm Carriage Bolt (38) into the
centre hole in the Seat Plate (37). Attach the wide
end of the Seat (13) to the Seat Plate with two
M6 x 16mm Bolts (18).
Attach the Seat Plate (37) to the Seat Frame (36)
with the M6 x 50mm Carriage Bolt (38), an M6
Washer (78), and the M6 Nylon Locknut (2).
Attach the other end of the Seat (13) to the Seat
Frame (36) with an M6 x 50mm Bolt (33) and an
M6 Washer (78).
47. Attach the Backrest (41) to the Front Upright (42)
with two M6 x 73mm Bolts (43) and two M6
Washers (78).
45
46
47
18
55
18
59
78
78
4
18
78
18
78
13
36
37
78
2
38
78
33
18
43
43
42
41
78
78
Seat Assembly