Weider WESY96310 - Page 15

15
29. Attach the end of the Low Cable (23) to the Long
“U”-Bracket (57) with a 1/4” Nylon Locknut (2)
and a 1/4” Washer (10). Do not completely
tighten the Nylon Locknut; it should be
threaded onto the end of the Cable so only a
couple of threads are showing above the
Nylon Locknut, as shown in the inset drawing.
30. Attach the High Cable (58) to a Small “U”-Bracket
(71) with a 1/4” Nylon Locknut (2) and a 1/4”
Washer (10). Do not completely tighten the
Nylon Locknut; it should be threaded onto the
end of the Cable only a couple of turns, as
shown in the inset drawing.
Attach the Small “U”-Bracket (71) to the indicated
Weight Tube (63) with a 5/16” x 1 3/4” Bolt (24)
and a 5/16” Nylon Locknut (3).
31. Locate the Military Press Cable (72). Attach the
Military Press Cable to the other Small “U”-
Bracket (71) with a 1/4” Nylon Locknut (2) and a
1/4” Washer (10). Do not completely tighten the
Nylon Locknut; it should be threaded onto the
end of the Cable only a couple of turns, as
shown in the inset drawing.
Attach the Small “U”-Bracket (71) to the indicated
Weight Tube (63) with a 5/16” x 1 3/4” Bolt (24)
and a 5/16” Nylon Locknut (3).
31
29
10
58
24
71
10
2
30
57
23
3
24
63
71
10
2
3
72
2
2
57
23
58
10
2
71
72
2
71
63