Weidmüller IE-CS-2TX-1RS232/485 - 3 Initial IP Address Configuration

3
3. Initial IP Address Configuration
When setting up your IE-CS(T)-2TX-xRS232/485 for the first time, the first thing you should do is configure the
IP address. This chapter introduces the methods that can be used to configure the IE-CS(T)-2TX-xRS232/485’s
IP address. Select one of the initial IP Address configuration methods to configure the
IE-CS(T)-2TX-xRS232/485’s IP Address. For more details about network settings, see the Network
Settings section from Chapter 5, Web Console Configuration.
The following topics are covered in this chapter:
 Initializing the IE-CS(T)-2TX-xRS232/485’s IP Address
 Factory Default IP Address
 S/E-Converter Administrator
 Telnet Console
 Serial Console (19200, n, 8, 1)