Weidmüller IE-CS-2TX-1RS232/485 - IP Address Report

IE-CS(T)-2TX-xRS232/485 IP Serial LIB
6-30
3. On COM Grouping page, you can specify one serial port whose signals will be taken into account by the
COM Group and change the Read/Write status for each serial port.
IP Address Report
When IE-CS(T)-2TX-xRS232/485 is used in a dynamic IP environment, users must spend more time with IP
management tasks. IE-CS(T)-2TX-xRS232/485 products help out by periodically reporting their IP address to
the IP location server, in case the dynamic IP has changed.
1. Configure the IE-CS(T)-2TX-xRS232/485 with Dynamic IP settings (DHCP, BOOTP, or DHCP/BOOTP).
Assign the remote Auto IP report server’s IP address and UDP port.
2. Select the IP Address Report, and click the right mouse button to select Settings.