Weidmüller IE-CS-2TX-1RS232/485 - Page 19

IE-CS(T)-2TX-xRS232/485 Initial IP Address Configuration
3-6
3. Start Hyper Terminal and enter a name of your choice for the new connection. Select the appropriate COM
port for console connection in the “New Connection” window.
4. Select following Communication Parameter for the console connection: 19200 for Bits per second, 8 for
Data Bits, None for Parity, and 1 for Stop Bits and None for Flow control. Click on OK to continue.
5. Press the “ ` ” key continuously and then power on the IE-CS(T)-2TX-xRS232/485.
6. IE-CS(T)-2TX-xRS232/485 will automatically switch from data mode to console mode as it receives a
continuous string of “ ` ”.