5
June, 2016
Warning labels serve to advise the operator of potential danger. Warning labels should be kept clearly
visible at all times, and are not to be ignored or removed from the machine. Removal of warning labels
from the machine could result in an increase in machine related accidents. Should the machine require a
replacement label please contact the company immediately.
INJURY HAZARD:
If the doors are opened when the machine is in operation, the
machine should stop operating and the warning alarm should sound.
The machine cannot run until the doors have been closed and the
alarm has been reset from the touch screen.
MOVING PARTS:
Take caution when in the presence of moving parts as they may cut,
crush, dismember or otherwise injure body parts in close proximity.
Loose clothing or jewelry around moving components may get
caught and pull the operator into the machine. Power down before
servicing.
BURN HAZARD:
Many surfaces of the machine will become extremely hot during the
course of its operation. Please avoid contacting the indicated hot
surfaces to avoid burns.
Surfaces will remain hot for an extended period of time after
powering down the machine. The machine should be cool before
contact.
HAZARDOUS VOLTAGE:
While powered, the machine’s electrical systems possess sufficient
voltage to electrocute any who misuse it.
Do not attempt to tamper with the electrical systems of the machine.
If damaged wiring or damaged circuits are discovered, please power
the machine down and contact the company immediately.
To Next Page
Loading...
