63
June, 2016
HOME: Brings the operator back to the Home Screen.
SET DEFAULT: Pressing this button will set these Parameters as the machine’s default when starting up.
RESTORE DEFAULT: Pressing this button will restore the factory default Parameters..
MAIN JOG: Pressing and holding down on this button will activate the machine’s motor, which will turn the cam
shaft. While this button is held down, the machine’s mechanical systems will operate without its pneumatic systems,
air blower(s) or vacuums. The machine can stop at any position by releasing the button. Pressing the button again
will set the cam shaft in motion once more, from its last position.
To Next Page
Loading...
