Specialized Concentrated Focused
Preface「I」
Preface
About This Manual
This manual is intended for manufacturers. If you use the system for the first time, you need to read
through the manual. If you are experienced with the system, you can search for the desired info via the
contents.
With 3 chapters, this manual can be divided into 4 parts, as follows:
1) Part 1: preface, introducing general information of this manual as well as contact information of
some driver manufacturers.
2) Part 2: overview of product. Chapter 1 mainly introduces product features, combination of drivers
and motors, and typical examples of wiring diagrams.
3) Part 3: introductions to driver, including chapter 2, introducing naming rules of the driver, and its
specifications as well as dimensions.
4) Part 4: introductions to motor, including chapter 3, introducing naming rules of the motor, its
specifications and dimensions, pin dispositions of motor side connector as well as calculations for
motor selection.
Applicable Product Models
This manual is applicable to WISE (维智) servo driver. Refer to the table below for details:
At present, there are four models, including WSDV-2R8(0.4kW)；
WSDV-5R0(0.75kW)；WSDV-6R8(1.0kW)；WSDV-110(1.5kW).
It is herein abbreviated as WISE (维智).
For your information, without any special explanations, driver
hereinafter in this manual refers to WISE (维智) servo driver.
Contact Us
You can contact us by the following info for technical support and pre-sales/after-sales service:
Company Name: Weihong Electronic Technology Co., Ltd.
Headquarters Address: No. 29, 2338 Duhui Rd., Minhang, Shanghai 201108
Tel: +86-21-33587550
Fax: +86-21-33587519
E-mail: sales@weihong.com.cn
Website: http://www.en.weihong.com.cn
To Next Page
Loading...
Need help?
General
