6. Auscultate tube position by getting
MEDUtrigger to trigger manual
mechanical breaths. In an emergency,
perform mask ventilation using
MEDUtrigger.
7. Once the airway has been secured
successfully, perform continuous man-
datory ventilation, switching to “IPPV”
mode to do so. The ventilation param-
eters from Item 2 set at the beginning
are adopted automatically.
8. Ventilate continuously in “IPPV” or
“PRVC+PS” mode. The device shows
controlled ventilation parameters.
5. Following successful pre-oxygen-
ation, switch to “Manual” mode.
To Next Page
Loading...
