Weir SPM QWS 2500 XL - User Manual

Copyright © 2017, S.P.M. Flow Control, Inc.. All rights reserved. S.P.M. Flow Control, Inc. is the owner of the copyright and all confidential information in
this document, which must not be copied in whole or in part, in any form or by any means, and the information in it must not be used for any purpose
other than the specific purpose for which it has been provided without the prior written consent of the copyright owner. SPM, SAFETY IRON, SAFETY
HAMMER, SUR-DROP, DESTINY, STAMPEDE, DURALAST and GLADIATOR are trademarks and/or registered trademarks of S.P.M. Flow Control,
Inc.. WEIR and WEIR (logo) are trademarks and/or registered trademarks of Weir Engineering Services Limited. Certain features of some of the products
disclosed in this document may be protected worldwide by patents pending and registered in the name of S.P.M. Flow Control, Inc..
Document P/N: 2P137414
Release Date: 05/29/2017
Revision: IR
SPM
®
Well Service Pumps & Flow Control Products
QWS 2500 XL Power End
Operation Instruction and Service Manual

Summary

SPM R Product Safety Guide

Personal Responsibilities

Key responsibilities for safe operation and maintenance.

General Information and Formulas

Useful Pump Data Formulas

Formulas for calculating pump performance metrics.

Installation and Operation

SPM R QWS 2500 XL Pump Description

Overview of the pump, its design, and applications.

Performance Data and Curves

Key performance specifications, charts, and horsepower curves.

Lifting Requirements

Guidelines and points for safely lifting the pump assembly.

Power End Lubrication System

Recommended Lube Oils and System Requirements

Specifications for lube oils, reservoir, and system components.

Power End Lube Startup Procedures

Guidelines for initial lube system adjustments and startup.

Startup and Break-In Procedures

Pre-Operation Checks and Warm-up

Essential inspections and warm-up steps before pump operation.

Pump Valve Seating and Break-In

Procedures for seating valves and breaking in the pump.

Maintenance and Repair Procedures

Routine Preventative Maintenance Schedule

Schedule for daily, weekly, monthly, and quarterly maintenance tasks.

Fluid End and Power End Repair Procedures

Steps for removing fluid ends and performing power end repairs.

Troubleshooting and Support

Troubleshooting Common Issues

Lists common problems and their probable causes.

Service and Parts Information

Details on ordering parts, returns, and contact information.

Weir SPM QWS 2500 XL Specifications