OWNERS MANUAL FOR WEISS MEDEA+ D/A CONVERTER
Page: 32 Date: 02/11 /dw
Device Settings / Firmware Loader: Allows to upload new firmware to the MEDEA+. Not used for
normal operation.
Global Settings / Bus:
Master: Is the device which is sync master on the virtual bus in case multiple devices
(“MEDEA+s”) are connected.
Sync Source: The clock to which the MEDEA+ should sync to. Usually this is the MEDEA+’s
internal clock generator.
Sampling Rate: The sampling rate of the device when internally clocked.
Operation Mode: determines the stability of the system. Try other modes if there are clicks in the
music.
Global Settings / Info: Information about the driver version.
To Next Page
Loading...
