25
Basic Settings
You must make the following basic settings before using the device for the first time or
after changing the batteries:
• Volume
• Language
• Year
• Date (month, day)
• Time (hour, minute)
Press the TIME button for approximately 3 seconds.
NOTE
If you do not press any buttons for approximately 10 seconds, the monitor will
switch into standby mode.
12450 USA final Content REV1.indd 2512450 USA final Content REV1.indd 25 18.10.2012 12:00:1318.10.2012 12:00:13
To Next Page
Loading...
