Welby Upper Arm - Page 38

39
NOTE
User 1 and User 2 button are used interchangeably in the following
description.
If you want to store the values in memory 1, use the first button mentioned
for each action.
If you want to store the values in memory 2, use the second button
mentioned.
 Press User 1 or User 2 button and hold the button down for approximately
3seconds.
The average values of the last three measurements from the selected memory will be
shown in the display.
 Press User 1 or User 2 button and hold the button down for approximately 3seconds.
The de-pressurisation symbol will be shown.
12450 USA final Content REV1.indd 3912450 USA final Content REV1.indd 39 18.10.2012 12:00:1818.10.2012 12:00:18