46
Error message Possible cause Remedy
The results of
measurement
are abnormally
high or too low.
The cuff is not at heart
level.
Read the instructions on measuring
correctly. See page 16.
The cuff is not in the right
position on the arm.
Put the cuff on correctly. See page
32.
The cuff tube is not
connected correctly to the
monitor.
Attach the cuff‘s tube plug correctly
to the monitor.
12450 USA final Content REV1.indd 4612450 USA final Content REV1.indd 46 18.10.2012 12:00:2118.10.2012 12:00:21
To Next Page
Loading...
